Minka Group F571-DRF - Manual (Page 21)

Problem
Fan sounds noisy.
Solution
1. Allow a 24-hour "break-in" period. Most
noises associated with a new fan go away
during this time.
2. Make sure all motor housing screws are snug.
3. Make sure the screws that attach the fan
blade bracket to the motor hub are tight.
4. Some fan motors are sensitive to signals
from solid-state variable speed controls. If
you have installed this type of control,
choose and install another type of control
Problem
Fan Wobble
Solution
1.Make sure your hanger bracket and outlet box are
secure.
2.Use the enclosed blade balancing kit if blade wobble
is still excessive.(See instructions included with
the balancing kit.)
NOTE: All blades sets are grouped by weight. Because
plastic injection materials vary in density, the fan may
wobble even though blades are weight matched.
TROUBLESHOOTING
11
Problem
Fan will not start.
Solution
1. Check fuses or circuit breakers.
2. Check line wire connections to fan
3. Check to make sure the reverse is
set to one side. If the switch is located
in the middle it might not make
proper contact.
CAUTION: Make sure main power is
off.
and switch wire connections in
switch housing.
PProblem Solution