F594-e-p4, Electrical connections – Minka Group F594-ORB User Manual

Page 10

WARNING:

WARNING: To avoid possible electrical shock be sure electricity is

turned off at the main fuse or breaker box before wiring.

NOTE:

NOTE: The Aire Control

System is equipped with a learning frequency

function which has 256 code combinations to prevent potential
interference from other remote units. The frequency on your Receiver
and Transmitter units have been preset at the factory. (Fig. 2) No
frequency change is necessary, should you desire to install another fan
within the same home or area with a seperate frequency code please see
the "frequency interference" troubleshooting section of this instruction
manual to learn how to change the frequency.

Step 1 Connect the fan supply (black) wire to the black household supply
wire as shown in Figure 3 & 4.

Step 2. Connect the neutral fan (white) wire to the white neutral
household wire.

Step 3 Connect the fan ground wire (green) to the household ground wire.

Step 4. After all splices are made, check to make sure there are no loose
strands. As an additional precaution we suggest to secure the plastic wire
connectors to the wires with electrical tape.

ELECTRICAL CONNECTIONS

This manual is related to the following products:

F594-WH