Minka Group F510-WH - Manual (Page 22)

14
TROUBLESHOOTING
SYMPTOM
Fan Sounds Noisy
SOLUTION
Allow a 24-hour "break-in" period. Most noises as sociated with a new
fan go away during this time.
Make sure all motor housing screws are snug.
Make sure the screws that attach the fan blade bracket to the motor
hub are tight.
Check fuses or circuit breakers.
Check wall control connections.
Check line wire connections to fan and switch wire connections in
switch housing.
CAUTION: Make sure main power is off.
Check to make sure the reverse is set to one side. If switch is located
in the middle it might not make proper contact.
SYMPTOM
Fan will not start
SOLUTION