Minka Group F510-WH - Manual (Page 18)

11
Fig 13
BULB
GLASS SHADE
WARNING: Shut of the power supply before removing or replacing lamp. In handling of halogen
bulb, care should be taken not to touch it with your bare hands. Oil residue will shorten the life of
the halogen bulb. If you accidentally come into contact, wipe thoroughly with a clean, lint-free,
cotton cloth. Allow the bulb to cool off for 10 minutes before changing the bulb. Use light bulb in
accordance with the fan's specification. TO REDUCE THE RISK OF FIRE DO NOT EXCEED MAXIMUM
WATTAGE RATING.
Step 1. Install the 50w halogen bulb (included).
Step 2. Raise glass shade up against bottom of fan housing and secure it to the fan by turning the
glass shade clockwise until snug. DO NOT OVERTIGHTEN. (Fig. 13)
INSTALLING THE LIGHT BULB & GLASS SHADE
LIGHT KIT
MOUNTING
PLATE