F510-e-p-14, Installing the light kit mounting plate – Minka Group F510-WH User Manual

Page 16

Text mode
Original mode

Fig. 11

INSTALLING THE LIGHT KIT MOUNTING PLATE

Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not

remove)

Step 2. Place the key holes from the light kit Mounting Plate mounting plate over the 2 screws
previously loosened from the mounting ring, turn light kit mounting plate until it locks in place at
the narrow section of the key holes. Secure by tightening the 2 screws previously loosened and the
one previously removed. (Fig. 11)

LIGHT KIT

MOUNTING

PLATE

SCREWS

MOUNTING RING

This manual is related to the following products:

F510-BS