Minka Group F614-PW - Manual (Page 17)

8
Fig 19
Step 1. Remove the 1 of 3 screws from the mounting ring and
loosen the other 2 screws. (Do not remove)
Step 2. Place the key holes on the switch cup plate over the 2
screws previously loosened from the mounting ring, turn switch
cup plate until it locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws previously loosened
and the one previously removed. (Fig. 18)
Step 3. Remove the screws from the switch cup plate. While
holding the switch cup, firmly snap the wire molexes together.
Next, slide switch cup up against plate and rotate it until the
screw holes are aligned. Secure switch cup to plate using the
screws removed earlier. (Fig. 18)
NOTE: DO NOT PINCH WIRES BETWEEN THE SWITCH CUP AND
THE SWITCH CUP PLATE.
Step 4. Attach the pull chain fob to the chain on the switch cup.
ATTACHING THE SWITCH CUP
Fig 18
SWITCH CUP
MOUNTING
PLATE MOLEX
SCREWS
PULL
CHAIN
MOUNTING
RING
MOUNTING
PLATE
SCREWS