Minka Group F614-PW - Manual (Page 13)

5
ELECTRICAL CONNECTIONS
REMEMBER to shut the power off at the circuit breaker or fuse box.
Follow the steps below to connect the fan to your house supply wires. Use
the wire nuts supplied with your fan. Secure the wire nuts by wrapping
the connection with electrical tape.
Step 1. Connect the black (hot) wire from the ceiling to the black and the
blue wires from the fan. Connect the white (Neutral) wire from the ceiling
to the white wire from the fan. (Fig. 12)
Step 2. If your outlet has a ground wire (Green or Bare Copper) connect the
fan ground wires (on hanger ball and hanger bracket) to it; otherwise
connect the fan ground wire on hanger ball directly to the hanger bracket.
(Fig. 11)
Step 3. Figure 13 & 14 Illustrate the wiring connections using optional wall
unit. (Available at your Minka-Aire
® Retailer.) NOTE: If a light kit is not
included with your fan, one can be purchased at your Minka-Aire ® Retailer.
Fig. 12
BLACK (HOT)
WALL
WHITE (NEUTRAL)
GREEN (GROUND)
CEILING
HOUSE WIRE SUPPLY
BLUE (OPTIONAL LIGHT)
BLACK (MOTOR)
WHITE (NEUTRAL)
FAN CONTROLLED BY PULL CHAIN, LIGHT KIT CONTROLLED BY PULL CHAIN.
GROUND
(CONNECT TO GROUND WIRE ON
HANGER BRACKET IF NO HOUSE
GROUND WIRE EXISTS.)