MEGUIAR'S MV81 - Manual (Page 6)

MV81, Velocity Mould Compound (19-17A): MV8101
__________________________________________________________________________________________
Page: 6 of 14
Strong oxidising agents.
10.6 Hazardous decomposition products
Substance Condition
None known.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labelling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1 Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Eye contact
Dust created by cutting, grinding, sanding, or machining may cause eye irritation: Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Skin contact
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Inhalation
Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system:
Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, nose and throat pain. May cause target
organ effects after inhalation.
Ingestion
Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea.
Target Organ Effects:
Prolonged or repeated exposure may cause:
Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of
sputum, and changes in lung function tests.
Toxicological Data
Acute Toxicity
Name Route Species Value
Overall product Ingestion No test data available; calculated ATE
>5,000 mg/kg
Aluminium oxide Inhalation-Dust/Mist
(4 hours) Rabbit LC50 > 1.9 mg/l
Aluminium oxide Ingestion Rat LD50 > 5,000 mg/kg
Naphtha (petroleum), hydrotreated
heavy Dermal Rabbit LD50 > 3,000 mg/kg
Naphtha (petroleum), hydrotreated
heavy Inhalation-Vapor (4
hours) Rat LC50 estimated to be 20 - 50 mg/l
Naphtha (petroleum), hydrotreated
heavy Ingestion Rat LD50 > 5,000 mg/kg