MEGUIAR'S MV81 - Manual (Page 13)

MV81, Velocity Mould Compound (19-17A): MV8101
__________________________________________________________________________________________
Page: 13 of 14
classified as hazardous as per applicable regulations) shall be considered,stored,treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC -
2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor
EU waste code (product as sold)
120106* Mineral-based machining oils containing halogens (except emulsions and solutions)
SECTION 14: Transportation information
ADR/IMDG/IATA: Not restricted for transport.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Carcinogenicity
Ingredient CAS Nbr Classification Regulation
Triethanolamine 102-71-6 Gr. 3: Not classifiable International Agency
for Research on Cancer
Global inventory status
Contact manufacturer for more information The components of this material are in compliance with the provisions of the
Korean Toxic Chemical Control Law. Certain restrictions may apply. Contact the selling division for additional information.
The components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification
and Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information.
The components of this material are in compliance with the provisions of Japan Chemical Substance Control Law. Certain
restrictions may apply. Contact the selling division for additional information. The components of this material are in
compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling
division for additional information. The components of this product are in compliance with the new substance notification
requirements of CEPA. The components of this product are in compliance with the chemical notification requirements of
TSCA.
15.2. Chemical Safety Assessment
Not applicable
SECTION 16: Other information
List of relevant H statements
EUH066 Repeated exposure may cause skin dryness or cracking.
H304 May be fatal if swallowed and enters airways.
H332 Harmful if inhaled.
H336 May cause drowsiness or dizziness.
List of relevant R-phrases
R20 Harmful by inhalation.
R65 Harmful: May cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.