MEGUIAR'S MV81 - Manual (Page 5)

MV81, Velocity Mould Compound (19-17A): MV8101
__________________________________________________________________________________________
Page: 5 of 14
regulations:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Liquid.
Appearance/Odour White creamy viscous lotion with slight hydrocarbon odour.
pH 8.00 - 8.80
Boiling point/boiling range 100 ºC
Melting point No data available.
Flammability (solid, gas) Not classified
Explosive properties Not classified
Oxidising properties Not classified
Flash point 93.3 ºC
Autoignition temperature No data available.
Flammable Limits(LEL) No data available.
Flammable Limits(UEL) No data available.
Vapour pressure No data available.
Relative density 1.00 [Ref Std:WATER=1]
Water solubility Complete
Partition coefficient: n-octanol/water No data available.
Vapour density No data available.
Viscosity 25 - 35 Pa-s
Density 1 g/ml
9.2. Other information
Volatile organic compounds (VOC) 16.1 % [Test Method:calculated SCAQMD rule 443.1]
Volatile organic compounds (VOC) 160.00 g/l
VOC less H2O & exempt solvents 441.01 %
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Heat.
10.5 Incompatible materials
Strong bases.
Strong acids.