Myron L 6PFCE and 4P - Manual (Page 36)

XVI. bluDock™ WIRELESS DATA TRANSFER INSTRUCTIONS
NOTE: Bluetooth® is a registered trademark of Bluetooth SIG. The
bluDock Bluetooth module is a registered Bluetooth device.
Requires Myron L bluDock™ accessory package, Model # BLUDOCK.
Package includes Ultrameter II hardware modification that allows the
unit to communicate wirelessly with a personal computer configured for
wireless device communication. Package also includes U2CI software
application that will operate on Windows XP, Vista and 7*, and Macintosh
OSX** based computer systems and Bluetooth USB adapter (dongle)
for computers that do not have Bluetooth capability.
A. Software Installation
Follow the instructions in the “U2CI Software Installation Guide” that
was shipped with your blueDock equipped instrument or download it
from the Myron L Company website.
http://www.myronl.com/main/U2CI_Application_DL.htm
B. Hardware Setup
For a computer without Bluetooth® capability:
If you don’t have the dongle that came with the BLUDOCK, one can be
ordered separately from the Myron L Company. Order Model # BDDO.
Plug in your dongle and install per manufacturer’s instructions.
For computers with Bluetooth
Figure 30
capability/Bluetooth dongle installed:
First time use of the bluDock:
1. Press any parameter button
to turn the Ultrameter II on.
2. Put the Ultrameter II in “PC
On” mode by pressing the
key until “PC OFF”
Figure 31
appears (see Figure 30).
3. Then press the key.
“PC On” will be displayed
(see Figure 31).
32