KEMP PRIMERGY RX - Manual (Page 7)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 7 / 15
LoadMaster for Fujitsu Installation
Installation Guide
Figure 2-2: IP address
The LoadMaster should obtain an IP address via DHCP, please note this value.
If the LoadMaster does not obtain an IP address via DHCP then the LoadMaster must be manually
configured using the console. Please refer to Section 3 for further information regarding manually
configuring the LoadMaster.
After a successful boot, a login prompt will appear. Log in using the LoadMaster user credentials. The
default login details are as follows:

lb100 login: bal

password: 1fourall
2.3 Licensing and Configuration
The LoadMaster must now be configured to operate within the network configuration.
1. In an internet browser, enter the IP address that was obtained in Section 2.2.
Ensure to enter https:// before the IP address.
2. A warning may appear regarding website security certificates. Please click the
continue/ignore option.
3. Enter the user name and password when requested.
The default login credentials are as follows:
lb100 login: bal
Password: 1fourall