Power on the loadmaster, Virtual loadmaster for microsoft hyper-v, 4 power on the loadmaster – KEMP Hyper-V 2008 R2 User Manual
Page 8
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 8 / 18
Virtual LoadMaster for Microsoft Hyper-V
Installation Guide
Expand the Network Adapter menu and Select the Static option within the MAC
address section and enter the relevant MAC address.
Ensure that the Enable spoofing of MAC addresses checkbox is selected.
Figure 2-3: Network Adapter settings
5. Click on the OK button.
6. Repeat these steps for the second network adapter.
Jumbo frames are supported for Hyper-V network synthetic drivers.
2.4 Power On the LoadMaster
Once the VLM has been deployed it can be powered on:
1. Right-click the Virtual Machine that was imported within the Virtual Machines pane.