NaceCare Solutions ST580 - Manual (Page 8)

Follow these regulations carefully to avoid harm to the operator and damage to the
machine.
• Read the labels on the machine with attention.
• Never cover them for any reason and always immediately replace them if they are
damaged.
• Never mix different types of detergents: this could generate noxious gases.
• Never set containers of liquid on the machine.
• Always remove the recovery tank when performing battery recharging or maintenance.
• Machine storage temperature must be between -25°C and +55°C.
• Optimum operating temperature is between0°C and 40°C.
• Relative humidity must be between 30-and95%.
• Never use the machine in an explosive environment.
• Never use the machine to transport goods.
• Never use acid solutions that could damage the machine.
• Avoid running the brushes with the machine stopped: this could damage the floor.
• Never aspirate flammable liquids.
• Use a powder fire extinguisher in case of fire. Do not use water.
• Do not hit against shelving or scaffolding when there is a danger of falling objects.
• Suit operating speed to traction conditions.
• Never exceed the maximum slope limits: this could cause instability.
• Whenever you park the machine, remove the key. (On the machines with traction apply the
parking brake).
• The machine must perform washing and drying operations simultaneously. Any other
operations must be done in zones where the presence of unauthorized persons is prohibited.
Signal wet floors with suitable signs.
• Whenever the machine has operating troubles check to make sure these are not
GENERAL RULES OF SAFETY
• When replacing machine parts always ask for ORIGINAL spare parts from your
Authorized Agent and/or Retailer.
• For machines with a traction motor, in case of danger, immediately engage the emergency
brake.
• Always cut out the electric power supply to the machine whenever maintenance is
performed.
• Never remove guards that require tools for removal.
• Never wash the machine with direct or pressurized jets of water or with corrosive
substances.
• Have you’re nearest service centre check the machine every 200 operating hours.
• This machine does not generate harmful vibrations to the operator