Fagor VCE-180C - Manual (Page 15)

14
8. TROUBLESHOOTING
The hand-held vacuum is
not working
The powered brush is not
working
1. Batteries need charging 1. Charge the appliance
1. The vibrator is blocked
with waste or dirt
1. Remove the dirt from the
vibrator. If there is any
thread or string caught up,
cut it away carefully with
scissors.
4. The charger is connected. 4. Disconnect the charger.
3. There is no power in the
power transformer from
the electricity socket.
3. Check the fuses or
switches.
3. The vacuum cleaner unit is
not properly positioned.
3. Place the vacuum cleaner
unit properly in position.
2. The contacts between the
appliance and the charger
base are dirty
2. Clean the dirt off the
contacts
2. The belt is broken. 2. Call the repair centre.
PROBLEM CAUSE SOLUTION
The suction power is weak
1. The dust container is full. 1. Empty the dust container.
3. The appliance needs
recharging.
3. Charge the appliance.
2. The dust container
filter needs cleaning or
changing.
2. Remove the container filter
and check for any objects
in the air pipe to remove
them. Clean or change the
filter.
The dust is coming out of
the vacuum cleaner
The battery does not stay
charged
1. The container is full. 1. Empty the dust container.
1. The battery has reached
the end of its service life.
1. Call the repair centre.
3. There are holes in the
container filter
3. Change the filter.
2. The container filter is not
properly installed.
2. Check the instructions
for installing the container
filter.