Fagor CG-306 - Manual (Page 12)

suggest one dessertspoon of ground
coffee per cup of coffee. After using the
coffee maker several times, you may
adjust the amount of coffee to taste.
• Place the jug (6) with its lid (5) properly
assembled on the hotplate (7). Make
sure that the jug lid opens the anti-drip
valve, otherwise the filtered coffee will
not filter through to the jug and will
overflow out of the filter.
• Plug the appliance into the mains.
• Connect the coffee maker by pressing the
switch (12). The pilot light will come on.
• For models CG-306, CG-314, CG-406
and CG-412, when the coffee is ready,
the coffee jug is kept hot by the warming
plate. Press the switch (12) to turn off
the coffee maker.
For model CG-416 TH, the coffee maker
will switch off automatically, and the
thermal jug (11) will keep the coffee
hot. To stop the coffee maker, press the
switch (12).
• When the jug is empty, unplug the
appliance from the mains and wait
approximately ten minutes for the coffee
maker to cool down before making more
coffee or cleaning it.
To give your coffee a better flavour and
aroma, we recommend that you use
recently ground coffee.
The coffee should be medium ground and
should not be too fine.
Keep your coffee in a dry place. Once the
coffee packet has been opened, keep it well
closed in the refrigerator so as to maintain
its aroma.
Although the hotplate will keep the coffee
hot, it is best to drink your coffee as soon
as it is made.
This jug enables you to keep your coffee
hot.
7. THERMAL JUG (mod. CG-416 TH)
6. RECOMMENDATIONS FOR MAKING
A GOOD CUP OF COFFEE
To open the lid, turn it anti-clockwise to line
up the marks on the jar and the lid, then
loosen and remove it (fig. 5).
To close the jug and use it, line up the
marks again and turn it clockwise.
To pour the coffee, press the button. The
lid will lift up slightly and the coffee can be
poured.
Turning this control (8) allows you to
adjust the flavour of the coffee, varying the
strength of the coffee.
Weaker coffee is provided by the
position while stronger coffee is made at the
position.
Before cleaning your coffee maker, switch
off the on/off button, unplug the appliance
from the socket and wait until it has cooled
down.
Clean the filter holder, the filter, the jug and
the jug lid in lukewarm soapy water, rinse
with clean water and dry the parts before
reassembling them.
All moving parts may be washed in the
dishwasher.
Clean the outside of the coffee maker with
a damp cloth. Do not use detergents or
abrasive products to clean it.
Do not immerse the appliance in water or
run it under the tap.
• Depending on how hard the water is in
your area and how often you use your
coffee maker, it is possible that the pipes
may become blocked due to the lime
content of your water. This becomes
noticeable when the filtering process
lasts longer than usual. In order to avoid
8. AROMA CONTROL (mod. CG-416 TH)
10. REMOVING LIMESCALE
9. CLEANING THE COFFEE MAKER
11