Fagor 9CFM60N - Manual (Page 19)

19
decreases by degrees. Namely, the
variability is 01 each time when it is
pressed once; And the largest digit is
23, the ” “ button can’t work when
exceeded. If it is equal to 00, the ” “
button can’t work.
— Press the Timer “ “ button for the
second time, time segment “
88:88
“,
and the last two number for minute
setting will fl ash. Press ” “ button, the
number increases by degrees, and press
”
“ , the number decreases by degrees.
Namely, the variability is 01 each time
when it is pressed once; And the largest
digit is 59, the ” “ button can’t work
when exceeded. If it is equal to 00, the
”
“ button can’t work.
— Press the Timer “ “ button for the
third time, and it means time setting exit
and confi rmation.
— Long press the Timer “ “ button for
2-5 seconds under mode, it is for hour
setting. Press it for the second time:
minute setting. Press it for the third
time: time setting exit and confi rmation.
And it will repeat the action again and
again when it is pressed.(It can’t run
this procedure, if the fi rst time pressing
doesn’t exceed 2 seconds).
3 / USING YOUR APPLIANCE EN