3 viewing the master screen, 4 network setup, Ex-007 user manual – DiGiCo EX-007 User Manual
Page 4
![background image](/manuals/460228/4/background.png)
EX-007 User Manual
Page 4
1.3 Viewing the Master Screen .....................................................
When setting up the network between the SD-7 and EX-007, it is useful to be able to view the Master Screen on the EX-007. To do this,
press either the left section Rotary Resolution button or the keyboard F5 key. Pressing either of these buttons again will return the screen
to a Channel view. Moving a Channel control or Assignable rotary will also return the screen to a channel view.
Keyboard
Press Left Input section Rotary Resolution button
Key
To view Master Screen on EX007
1.4 Network Setup .........................................................................
When the system is correctly connected and the application is running, open the Master screen / Network Panel and you should see the
following details. The picture below shows the SD-7 A Engine which is Online to the SD-7 B Engine and a Remote Control unit which in
this case is an EX-007.
All devices in the system (Both SD-7 engines and the EX-007) must be "synced" and mirrored in the standard way.
NOTE: Please ensure that Options/Session Tab/Enable Console Network is set to YES on all devices before proceeding.