Low battery / no battery – Beijer Electronics iX Panel T40 EN User Manual

Page 39

Fault Tracing

The iX Panel T40 is working, but one or more keys are

not working

1. Check that the ﬂex cables are correctly ﬁtted.
2. Replace the front according to the

section.

The touch screen is malfunctioning or is not

responding at all

1. Re-calibrate the touch screen according to the

sec-

tion.

2. Check that the ﬂex cable is correctly ﬁtted.
3. Replace the display of the operator panel according to the

section.

4. Check the touch interface on the power card.

Lines in display has wrong color or the display picture

is shifted

1. Check if the display has a wide vertical or horizontal area across the

display. It should be at least 2-3 cm wide with a grey or black color. See

for instructions on how to correct this.

2. Make sure the display cable is correctly ﬁtted.
3. Make sure the display cable is not folded or damaged in any way. Replace the

display cable according to the

section.

The iX Panel T40 will not restart after changing a

component

1. Remove and insert the battery again.

Low battery / No battery

1. Check that the battery is correctly ﬁtted in its holder.
2. If low battery/no battery voltage, replace the battery according to the

section.

Beijer Electronics, MAEN004