Beijer Electronics iX Panel T40 EN - Manual (Page 2)

Foreword
Service & Maintenance manual for iX Panel T40
Foreword
This manual contains detailed information about iX Panel T40, including
descriptions of various actions that can be carried out in order to maintain or
update the operator panel hardware and software.
The manual contains descriptions of basic maintenance and replacement of
common parts in iX Panel T40.
The manual assumes that the most recent versions of the system program
(firmware) and iX Developer are used.
The following other manuals are available for iX Panel T40:
iX Panel T40 installation manual (MAEN992x) for information regarding
installation.
iX Developer reference manual (MAEN831x) for a description of the
configuration tool.
iX Developer user’s guide (MAEN832x) for function-based descriptions.
© Beijer Electronics AB, MAEN004, 2010-05
The information in this document is subject to change without notice and is provided as available at the
time of printing. Beijer Electronics AB reserves the right to change any information without updating this
publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.
Read the entire installation manual prior to installing and using this equipment. Only qualified personnel
may install, operate or repair this equipment. Beijer Electronics AB is not responsible for modified, altered
or renovated equipment. Because the equipment has a wide range of applications, users must acquire the
appropriate knowledge to use the equipment properly in their specific applications. Persons responsible
for the application and the equipment must themselves ensure that each application is in compliance with
all relevant requirements, standards and legislation in respect to configuration and safety. Only parts and
accessories manufactured according to specifications set by Beijer Electronics AB may be used.
BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER
ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE
REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND
OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER
ELECTRONICS AB .
Beijer Electronics, MAEN004