Ultra space saver – American Bicycle Security Company Ultra Space Saver User Manual
Page 6
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
*Tools Needed for Installation
Saw for cutting PVC pipe (such as a SkilSaw)
Saw for cutting metal pipe
Tape Measure
Installation Steps:
Ultra Space Saver
Shortening the Ultra Space Saver to Fit a Space
You may find it necessary to field fit an Ultra Space Saver.
The following instructions describe this process.
1. The Space Saver crossbeams come in increments of 16”. Cut your
crossbeams down in increments of 16” to get the appropriate fit. For
example. If you ordered a length of 12 Space Savers (127” long) but you
only have 120” of space as shown in this diagram, but the crossbeams
down 16”. This will eliminate one arm from the system. If you only have 108”
of available space, you will need to cut 32” from your system and will lose
two arms.
If the system you ordered barely doesn’t fit (less than 3” too large), you CAN
eliminate the 3” end spacers and cut down the crossbeams by 3”. You will
NOT lose an arm by doing this.
Installation Steps: