Pocket shelter – American Bicycle Security Company Pocket Shelter User Manual
Page 6
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Pocket Shelter
Installation Instructions –
Roof Assembly
1. METAL ROOF
If using metal roofing, place the initial section of TYPE S DECK and secure with (6) ¼” x 1” self-drilling screws. The screws will drill
through the TYPE S DECK and shelter without a pilot hole. Place the second section of TYPE S DECK with sufficient overlap and secure
with (6) ¼” x 1” self-drilling screws. Continue with the remaining sections. The last section of TYPE S DECK will receive (9) ¼” x 1”
self-drilling screws.
2. POLYCARBONATE ROOF
If using polycarbonate roofing, place POLYCARBONATE ROOF PANELS and POLYCARBONATE FLANGE. After locating a pilot hole in
the PURLIN, use a ¼” x 1” self-drilling screw to drill through the POLYCARBONATE ROOF PANEL and into the pilot hole. Confirm
the POLYCARBONATE ROOF PANEL is aligned with the shelter and continue with all pilot holes. Use ¼” x 1.5” self-drilling screws
when attaching the POLYCARBONATE FLANGE.