Pocket shelter – American Bicycle Security Company Pocket Shelter User Manual
Page 5
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Pocket Shelter
Installation Instructions –
Base Structure
Installation Steps:
1. Attach the RAFTER TOP to the UPRIGHT with (4) 3/8” x 1”
carriage bolts, nuts and washers. Repeat for all RAFTER
TOPS and UPRIGHTS.
2. Stand up the UPRIGHT ASSEMBLIES and
attach each PURLIN with (2) 3/8” x 1”
carriage bolts, nuts and washers. Continue
standing up UPRIGHT ASSEMBLIES and
attaching PURLINS if building a modular
shelter.
3. Attach each REAR PANEL SUPPORT with
(2) 3/8” x 3.25” bolts, (4) washers, and
(2) nuts. The surface with 21 holes should
be facing away from the shelter.
4. Using the UPRIGHT feet as a guide, drill
½” dia. x 5.5” holes in the concrete
footings at each UPRIGHT foot. Install (4)
½” dia. x 5.5” wedge anchors at each
UPRIGHT foot. See footing diagram for
more detail.