Akai MPK261 - Manual (Page 20)

20
Transport Controls
Type: The type of message that will be sent. The available settings are MMC, MMC/MIDI
Clock, MIDI Real Time, MIDI CC, and Pro Tools Express (PTEX).
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off).
MIDI data will be sent to MPK261's USB connection regardless of this setting.
Note Repeat
Time Division: The speed of the repetition as a division of the master tempo or external clock.
The available options are 1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32, and 1/32T. (T denotes a
triplet-based Time Division.)
Tip: You can also adjust this setting in the Tap Tempo button parameters. See Edit Mode:
Tap Tempo section.
Mode: This determines whether it is in Momentary Mode (activates Note Repeat only while
pressed and held, deactivates it when released) or Toggle Mode (activates Note Repeat when
pressed once, deactivates Note Repeat when pressed once again).
Gate: The length of the repeated notes. The available range is 00%–99% of the current Time
Division setting. (See Edit Mode: Tap Tempo for more information.)
Swing: The amount of swing used in the repeated notes. The available range is 50%–75%.