3 5 0 °f – Alto-Shaam FRYTECH ASF-60G series User Manual
Page 33
PROGRAMMING THE CONTROL
“SetPoint
This program allows the operator to change the temperature of the frypot oil/shortening. The set-
point temperature of the oil/shortening can be adjusted from a range of 250°F to 450°F
(121°C to 232°C). The factory default is set at 350°F (177°C).
Press the Up
or Down
arrow keys to scroll until “SetPoint” appears in the display. Press
the right
4
arrow key to enter the program. Display stops flashing. The previously set
temperature will appear in the display. Press the Up
or Down
arrow keys to change
the setting. When the correct set-point appears, press the right
4
arrow key to confirm the
setting. Display flashes. Press the down
arrow key to advance the control to the next
program feature.
To exit the control programming mode at any time, press and hold t
he LEFT
arrow key
.
3 5 0
°F
SetPoint
Gas Fryer Operation & Care Manual • 31
D E L U X E C O N T R O L O P E R A T I O N