Pulsafeeder Polymer Makedown Systems EN - Manual (Page 2)

Manual Polymer Makedown Systems
Installation, Operation and Maintenance Manual
72-910-MPMDS-E Rev A
ii
Pulsafeeder Factory Service Policy
Should you experience a problem with your Polymer Makedown System, first consult the
troubleshooting guide in this operation and maintenance manual, as well as the information in the
manual for your Pulsatron pump. If the problem is not covered or cannot be solved, please contact
your local Pulsafeeder Sales Representative or Distributor, or our Technical Services Department for
further assistance.
Trained technicians are available to diagnose your problem and arrange a solution. Solutions may
include purchase of replacement parts or returning the unit to the factory for inspection and repair. All
returns require a Return Authorization number to be issued by Pulsafeeder. Parts purchased to correct
a warranty issue may be credited after an examination of original parts by Pulsafeeder. Warranty parts
returned as defective which test good will be sent back freight collect. No credit will be issued on any
replacement electronic parts.
Any modifications or out-of-warranty repairs will be subject to bench fees and costs associated with
replacement parts.
Copyright ©2013 Pulsafeeder, Inc. All rights reserved.
Information in this document is subject to change without notice. No part of this publication may be
reproduced, stored in a retrieval system or transmitted in any form or any means electronic or
mechanical, including photocopying and recording for any purpose other than the purchaser’s personal
use without the written permission of Pulsafeeder, Inc.