Pulsafeeder Pulsa Series 680 EN - Manual (Page 20)

17
5.3 Maintenance Parts Stock- KOPkits ®
Pulsafeeder offers a KOPkit which is a group of recommended spares carried in stock for replacement due to
normal wear. The Kit covers such items as diaphragm, diaphragm gaskets if used, inlet and discharge valve parts,
a complete set of valve gaskets and hydraulic pump head gasket. The KOPkit part number for your pump is
indicated don the nameplate. A sufficient quantity of PULSAlube oil should be on hand for periodic oil changes.
5.4 Ordering Parts
When ordering parts, always specify:
1. Pump model and serial number (stamped on nameplate).
2. Part number (from parts list), or KOPkit number.
3. Material of reagent head construction (liquid end parts).
5.5 Additional Pulsafeeder Services
FIELD SERVICE: Including pump repair or conversion to different services is available at nominal cost.
FACTORY REPAIR: Complete pump reconditioning
OPERATOR TRAINING SEMINARS: Conducted by experienced factory trained service personnel at the
factory in Rochester, NY or in the field. Field trips are available at nominal cost.