Power Soak 33638 SILVERWARE WASHER OWNER'S MANUAL - Manual (Page 22)

22
On weld-in and drop-in units, the switch will usually be mounted under the
dish table adjacent to the pre-washer.
When finished, return the handle to the OFF position.
Washing Time
Allow the pre-washer to break down and soften the soils on the silverware.
Wash time will vary based on a number of factors:
• Soil load
• Silverware pattern
• Detergent used
• Water temperature
NOTE: Remember that the goal is pre-washing—soils should be softened
and decomposed so that a single pass through a spray washer will finish
the job. Do not expect that all traces of soil will be removed in the pre-
washer.
Allow the last utensils placed in the basket to wash for a minimum of 3 to 5
minutes.