Pitco Frialator P90K User Manual
Page 4
L20-270-UK Rev.00 11/16/04
4
MAILING ADDRESS – P.O. BOX 501, CONCORD, NH 03302-0501
SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301
In the event of problems with or questions about
your equipment please contact the Pitco
Frialator Authorized Service and Parts
Representative (ASAP) covering your area or
contact Pitco at the numbers listed to the left.
In the event of problems with or questions about
your order, please contact the Pitco Frialator
factory at:
(800) 258-3708 US and Canada only or
(603) 225-6684 World Wide
TROUBLESHOOTING
SCHEMATICS
Pump does not run
Check circuit breaker
Pump does not run, power is present at the
machine, circuit breaker is NOT tripped
Check the motor overheat trip switch located
on the end of the motor
Pump is running, but oil is not being pumped
Check for blockages in piping and return hose
Air bubbles are present when oil is being
pumped
There is an air leak on the suction side of the
pump, check filter connections