Pitco Frialator Digital Thermostat User Manual

Page 2

Press , Display will show "DF1"

Press again, Display will show "XX" (XX = current setting)

Press to change setting

Press again, Display will show "HI"

Press again, Display will show "XXX" (XXX = current setting)

Press to change setting

Press again, Display will show "LO"

Press again, Display will show "XXX" (XXX = current setting)

Press to change setting

Press again, Display will show "CAL"

Press again, Display will show "XX" (XX = current setting) NOTE: This

Number can be set as a NEGATIVE number (-30) or a POSITIVE number
(+30) above or below set point

Press to change setting

CHANGING PROGRAMMABLE SETTINGS

SAVE / EXIT PROGRAMMING MODE

TO SAVE OR EXIT PROGRAMMING MODE AT ANY TIME PRESS ‘F’ UNTIL DISPLAY
SCREEN IS BLANK AND THEN REMOVE JUMPER WIRE.

DF1

CAL

º F