Nor-Lake Plasma Freezers & Blood Bank Refrigerators - Manual (Page 7)

DRAWER REMOVAL
The blood storage cabinet
comes equipped with eight
stainless steel drawers per
cabinet door opening. To
remove for cleaning, move
the drawer forward; locate
the black release tabs
found on each drawer slide
rail. See illustration. Move
the release tabs on each
side to the release position
and slide the drawer
towards you and remove.
To install a drawer, guide
the drawer inner and outer
slide rail assembles
together and push the
drawer to the back of the
cabinet until the black
release tab is latched and
locked.
DRAWER SLIDE REMOVAL/ADJUSTMENT
Each drawer slide is independently removable and can be adjusted to different levels. First
remove the drawer per above instructions. Release the locking tabs located on the drawer
slide, move the front tab up and release the tab in the back of the cabinet, by sliding the
locking tab towards the front. See illustration. Unhook the drawer slide assembly from both
the front and back shelf standards by lifting up on the assembly.
To install a drawer slide, reverse the process used to remove the slide. Secure the locking
tabs into position after the drawer slide assembly is in place. Reinstall the drawer.
7