Nor-Lake AdvantEDGE Glass Frosters - Manual (Page 4)

4
04/14 Rev. A 157025
SPECIFICATIONS
PRODUCT GLASS FROSTERS
Model
GF36 GF50
Lid(s)
1 2
Shelves
4 4
Compressor
3/8 HP 1/2 HP
Refrigerant
R-134a R-404a
Power
115 V / 60 Hz/ 1 Ph
Plug NEMA 5-15P
Amps 5.3 7.9
Operating Temperature 0°F
Above specifications are subjected to change without prior notice for quality improvement .
* Dimensions do not include optional casters.
Install casters per the following diagram. - (Optional)
Note: Casters and bolts can be found packaged inside the cabinet. Install casters with
brakes to the front of the cabinet. The cabinet bottom has pre-punched holes for caster
mounting. Install caster bolts tight to prevent future damage to cabinet base from loose
casters.
Note: NSF codes require that the unit be sealed to the floor with an NSF listed silicone
sealant if it is not on legs or casters. After the unit is set in its desired location, simply apply a
bead of sealant around the base of the unit and smooth it out.