EXONIC EXM 930HP - Manual (Page 9)

Power and Mode Selection
Mute Function
1. Press the button on the remote control to mute the audio. MUTE
2. Press the button again on the remote control to return to the MUTE
previous volume level.
9
Releasing The Monitor
P u s h t h e r e l e a s e b u t t o n ( l o c a t e d o n t h e f r o n t e d g e o f t h e s c r e e n h o u s i n g ) a n d
l o w e r t h e m o n i t o r. Yo u c a n a l s o a d j u s t t h e s w i v e l a n g l e .
Turning on The Monitor
POWER
POWER
UNIT REMOTE CONTROLLER
Make this arrow in DOWN
direction only.
1. Connect the monitor to external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
3.Power on the external devices and play.
RELEASE BUTTON
DVD Functions
Repeat
Pressing REPEAT button changes
the play mode as follows:
[DVD]
OSD CONDITION
REP Chapter
REP Title
REP All
Repeat chapter
Repeat title
Repeat All
Repeat off
[VCD]
The REPEAT button does not function
when a VCD disc is being played.
Pressing REPEAT button changes
the play mode as follows:
[AUDIO]
OSD CONDITION
REP 1
REP All
Repeat 1
Repeat off
[MP3]
Pressing REPEAT button changes
the play mode as follows:
OSD CONDITION
REP DIR
REP 1
REP All
Repeat DIR
Repeat 1
Repeat off
Repeat All
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSC
PLA60 Auto and PAL formats.
24
Repeat All