EXONIC EXD 7095 - Manual (Page 34)

-34-
1). Place the Car Kit and mobile hand-
set in 3 meters apart.
3). Set your bluetooth phone to
“discover” the Car Kit .
Following your phone’s instruction
guide for details, active your mobile
handset’s Bluetooth function, the
handset will search for accessible
Bluetooth devices.
4). Your phone will find this Car Kit .
Select this Car Kit from the list.
5). Enter passkey “8888”, then press
“OK” to pair the Car Kit and the hand-
set, the word
“PAIR OK” , will display
in the TFT .
IMPORTANT:
1). If the pairing can not be completed
within approximately 2 minutes ,
whiles the pairing mode is activated,
and you will need to reattempt pairing
(See steps 2-5 above) .
2). After pairing is completed, if the
ICON is stilling flash on the TFT ,
please follow the steps to reattempt
pairing through your handset until the
ICON remains solid on the screen.
1. “Pair” To Your Bluetooth Phone
Prior to using the Car Kit for the fist time,
you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical Bluetooth-
enabled mobile handset.
2). Put the Car Kit in pairing mode.
a. Press the POWER button to turn
ON, the ICON will flash on TFT .
b. Touch the screen “ PAIR ” range
or press longer the “PAIR/ ” on
the front panel until the word
“PAIR ” display, it’s now ready
for pairing.
Touch Screen Operation
Bluetooth Operation
LCD display on the front panel will
display as below :
PAIR
0--0:00:01
DISC
ICON FLASH
2. Using The Bluetooth Car Kit.
Once connecting is complete, you
may access the following function.
Some of the below mentioned funct-
ions only accessible for handset
supported with hands-free profile.
Touch the screen of “ ” range,
the word
“DIAL NUMBERS” will display
on the TFT . then you can touch the
number section on screen , and
then touch the “ ” section to call .
Make a call
VOL+ VOL+ VOL - VOL -
13800138000 13800138000
call dial out call dial out
6). Select the “CONNECT” from the list
on the phone, if you connect succes-
sfully , the ICON remains solid on
the screen , then you can operate
the function of blue-tooth about the
unite .
LCD display on the front panel will
display as below :
DVD DVD
0--0:00:01
DISC
ICON remain solid