EXONIC EXD 7095 - Manual (Page 28)

SETUP
-28-
USING THE MENU
SYSTEM SETUP
1. Touch the screen of “ SET ” range
or press the SETUP button on remote .
2.The SETUP menu is displayed.
3.Touch directly the desired item to
select the preferred item .
Or by using the / / / buttons .
4. Touch the EXIT section to clear the
setup menu or press the SETUP on the
remote control .
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT
SYSTEM SETUP NTSC
PAL
AUTO
EXIT
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
Overview Of The Main Menu
(1). System Settings
(2). Language Settings
(3). Audio Settings
(4). Video Settings
(5). Digital Settings
(1) (2) ( 3) (4) (5)
TV TYPE SETUP
This player is capable of playing discs
recorded in either PAL or NTSC formats.
Make the selection based on whether you
are connecting the unit to a PAL TV or an
NTSC TV. You can also set the unit to
AUTO (autoselect). The disadvantage to
autoselect is that each time you turn the
unit on it checks to see what kind of
monitor is connected, which causes a
small delay and some flickering of the
display image which you may find
unpleasant.
ON
OFF
EXIT
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
SCREEN SAVER SETUP
If the screen displays a static image for
too long, some "burn-in" may occur,
leaving a permanent trace of the image
behind. To avoid this, turn ON the
SCREENSAVER item. After a short
period of inactivity on the monitor, the
unit will substitute a moving image to
avoid burn-in.
Touch Screen Operation