Radio operation, Scan function, Automatic preset setup – EXONIC EXD 4500T User Manual
Page 20: Touch to select, Touch to preset station

FM1
106.30
MHz
ST
DX
CH
6
LUD
SWF
POP
11:08AM
4
5
6
2
3
1
MOD
BND
Radio Operation
20
Touch the LOC section on the
touch screen (or press LO/DX
button on the remote) to select
the LOCAL or DX mode .
To tune in strong-singnal FM
Station only (LO/DX function)
(
)
You can choose between the LOCAL
and DX(DISTANCE) mode for local or
long-distance traffic news .
Storing Stations In Memory
Setting Memory
Press the
/CH 1-6 button repeatedly
on the front panel to preset stations at
radio mode .
Or touch the screen the
1-6 sections
(
)
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
-Store in Memory
Touch and keep the 1-6 sections
(or press and hold the
/CH 1-6) for
about 2 seconds, the current listening
station will be stored into the
number location
.
-Retrieve a preset station
Touch the 1-6 sections briefly (or press
the
/CH1-6 button repeatedly) to
retrieve a station which had been
stored in the memory in advance the
chose number is shown on display .
LOC
Scan Function
In Radio mode, briefly touch the
APS section on the touch screen
(or swing the SEL knob briefly in
the APS/DISP direction) , the radio
briefly plays all the preset stations of the
frequency band .
APS
In Radio Mode, Touch and keep
APS section on the touch screen
(or swing and hold the SEL knob in
direction of APS/DISP) for about
2 seconds to active automatic station
storage. The radio searches within the
current frequency band, e.g. FM1, for
the stronger signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations . Then
the station of the first storage location
is set .
APS
Touch to preset station
Automatic Memory Storing &
Program Scanning
Automatic Preset Setup
Touch it to select the other item,
it will display the following
as below :
FM1
106.30
MHz
ST
DX
CH
6
LUD
SWF
POP
11:08AM
DSP
CLK
APS
SWF
LUD
ST
VOLUME-
SEL
VOLUM+
Touch to select