Alpine NVD-A802 - Manual (Page 45)

42
-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
2
Touch the desired category of place type.
Select (highlight) the desired category of place
type by tilting the joystick and press ENTER.
• For details on how to use the list, see page 11.
• When you select “Input Place Type,” input a keyword
of place type and select Place Type.
• If more than one point of interest type exists, an icon is
displayed in front of point of interest type. If you
select the place type with , the Select Place Type
screen is displayed.
The Select Distance screen is displayed.
3
Touch the desired distance.
Select (highlight) the desired distance by tilting the
joystick and press ENTER.
The Select Place Name screen is displayed.
4
Touch the desired place name.
Select (highlight) the desired place name by tilting
the joystick and press ENTER.
The Confirm as Waypoint screen is displayed.
5
Touch [OK to Proceed].
Select (highlight) “OK to Proceed” by tilting the
joystick and press ENTER.
The system begins calculating a new route.
• A map surrounding the searched POI is displayed by
selecting “Map.”
Change Method
Change Method allows you to select the way the system
calculates the drive to your destination.
1
Touch [Change Method] on the route menu
screen.
Select (highlight) “Change Method” by tilting the
joystick and press ENTER.
The Select Method menu is displayed.
2
Touch the desired Method.
Select (highlight) the desired method by tilting the
joystick and press ENTER.
The system begins calculating a new route.
• For details of each Method, see page 32.
• Changing the method via the screen will be applied
only for the current destination. To change the method
permanently, refer to “Routing Method” (page 66).