DAK Americas Laser+ HS Ti818 G51A - Manual

Laser+
®
HS Ti818 (G51A) Product Information
polyethylene terephthalate resin
DAK Americas LLC
Gateway Corporate Center, Suite 210
223 Wilmington W Chester Pike• Chadds Ford, PA 19317
1-888-738- 2002 • fax: 610-558-7385 • www.dakamericas.com
PDS-G51A 140501KH
DAK Americas
ISO 9001:2008
#10004457
Product Description
Laser+
®
HS Ti818 (G51A) polyethylene terephthalate (PET) resin is designed for conversion to PET
packaging by injection stretch blow-molding using commercial heat-set technology.
Typical Properties
Laser+ ® HS Ti818 (G51A) is a low to moderate copolymer, antimony free and titanium catalyzed
polymer designed for processes requiring faster crystallization rates, higher glass transition and melting
points, but balances injection molding cycle speed and superior container performance.
Certification
Laser+ ® HS Ti818 (G51A) is ideally suited for food packaging applications and is considered in
compliance with the Food and Drug Administration (FDA) Food Notification (FCN) 000085.
Sales Specifications
Property Value Unit Test Method
Intrinsic Viscosity 0.79 ± 0.02 dL/g DAK-QAR-SOP-0012
Color L* 79.5 ± 2.0 CIE DAK-QAR-SOP-0011
Color b* -4.3 ± 2.0 CIE DAK-QAR-SOP-0011
Acetaldehyde 2 max ppm DAK-QAR-SOP-0010
Moisture Content (as packaged) 0.25 max weight % DAK-QAR-SOP-0013
Fines (as packaged, +24 Mesh Size) 0.10 max weight % DAK-QAR-SOP-0014
Chip Size, nominal 59 chips / g DAK-QAR-SOP-0015
Crystallinity > 45 % DAK-QAR-SOP-0016
Partical Size, Shape (Cylindrical) 3x2x2 mm DAK-QAR-SOP-0017
Melting Point, min 240 ºC DAK-QAR-SOP-0016
Bulk Density 56 lb / ft³ DAK-QAR-SOP-0018
These values represent the anticipated performance data for these polyester resins and intermediates; they are not intended to
be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible
helpful suggestion in the experimentation you may care to undertake along these lines. It is subject to revision as additional
knowledge and experience is gained. DAK Resins makes no guarantee of results and assumes no obligation or liability
whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest
infringement of, any existing patents.
CAUTION: Do not use in medical applications involving permanent implantation in the human body. For other medical
applications, see “DAK Medical Caution Statement”.