CatEye MSC 3Dx - Manual (Page 6)

6 MSC-3Dx
L A P
S
E
T/AT
LT
MODE
S/S
L A P
S
E
T
/A
T LT
MODE
S
/S
BUTTON NAVIGATION
Mode Button (MODE)
Under standard operations, this button switches the function of the lower display.
The functions of the lower display are divided into the main functions. Each main function has a
corresponding sub function. To switch the functions of the lower display:
• Push MODE button to switch from one main function to the next main function.
• Hold down MODE button for more than 2 seconds to switch from a main function to its sub
function.
• Push MODE button again to return to the main function from the sub function.
• You cannot directly move from one sub function to another.
See the following diagram for the flow of the main and sub functions.
Lap Button (LAP)
When the unit is measuring time, heart rate, etc., push this button to record data (Elapsed Time,
Distance, Lap's Average Speed, Lap's Average Heart Rate and Lap Cadence) at any arbitrary
point. Up to 50 lap data points can be captured. (See page 15, "Lap Feature")
Light Button (LT)
This button illuminates the screen for about 3 seconds.
Mode Button (MODE)
Lap Button (LAP) Light Button (LT)
Average
Speed
A
V
S
Trip
Distance
D
ST
Maximum
Heart Rate
M
X
P
Lap Count
LP
Maximum
Speed
M
X
S
Total
Distance
O
DO
SUB Function
SUB Function
Clock Time
(Current Speed)
(S)
Elapsed
Time
T
M
C (S)
MAIN
Function
Cadence
(Current Speed)
PUSH
Hold down
for two seconds
When the upper display is
Current Speed, Cadence
comes on the lower
display; or vice versa.
When the upper display is
Current Speed, Clock
Time comes on the lower
display; or vice versa.
Switching lower display with the MODE button