Balboa Water Group Spa Therapy Sequencer 52200-98 - Manual (Page 5)

5 Therapy Sequencer Balboa Water Group 5 Therapy Sequencer
Suggestion 8. Water test the Therapy Sequencer for proper operation.
Important: Be sure you have cleaned out any debris that may be in the plumbing system as a result of previous
manufacturing processes with compressed air before the sequencing valves were installed. Also, be sure to use clean
water when testing the system. Debris that normally accumulates in test water should not be run through the valves.
Doing so may clog the valves and require that they be disassembled to clean out the debris.
Press the “Jets” button on the main top side control panel to turn on the pump that supplies water to the sequencing
valves. When the pump is energized the Therapy Sequencer will also be powered up and will open all of the valves.
The LCD on the Therapy Sequencer top side panel will momentarily display “0” and then it will display two dashes. This
means that the system has been energized and all valves have been opened, but the system has not been
“turned on” to enable sequencing.
Push the On/Off button one time. This will change the LCD to indicate “On”. The system has been activated for
sequencing but no change in operation will occur.
To start a sequencing program, push the “Program” button one time. The LCD will momentarily display “P2” and then
alternately display “P2” with “S1”. The system is now running program 2 and sequencing at speed 1. (Speed 1 is the
default sequencing speed)
To change programs, push the “Program” button to step through the programs. The LCD will momentarily display
the next selected program “P3”, ”P4”, “P5” etc. and then alternately display the selected program with the sequencing
speed “S1” as shown above.
To change the sequencing speed, push the “Speed” button once. The LCD will momentarily display the next
selected sequencing speed, “S1”, “S2”, or “S3”, and then alternately display the current program and
the sequencing speed.
then alternates with
then alternates with