Anco Eaglin Afterburner 1015 - Manual

The ANCO ® 1015 Afterburner is a vapor
system component that utilizes a 150,000
BTU/Hr Burner to help reduce foul and
objectionable odors. The unit can be used with
up to two ANCO 5 x 16 Cookers, and is placed
in the vapor system after a condenser or hot
well. High temperature in the manifold
assembly allows the non-condensable gasses to
oxidize/reduce. This oxidation/reduction aids in
the reduction and/or removal of offensive odors
being emitted to the atmosphere.
Reduction amounts will depend on vapor stream
constituents and burner temperature settings.
The ANCO ® 1015 Afterburner gives you an
economical alternative to expensive vapor
scrubbing or incineration.
ANCO-EAGLIN, Inc., Greensboro, North Carolina
(See reverse page)
Est. 1902
The ANCO ® 1015 Afterburner consists of the
following components:
• Thermal Jet Burner
• Combustion Chamber
• Blower with 1/2 HP Motor
• Manifold
• High and Low Gas Chamber
• Switches with Indicator Light
• Flame Monitor
• Ignition Transformer
• Temperature Control with High
Temperature Safety Limit Switch
• Air Inlet Control Valve
• Control Panel
• Gas Train Valves and Switches
For versatility, the burner is capable of burning
Natural Gas, Propane, or Butane, with a firing range
of 80,000 BTU/Hr to a maximum 150,000 BTU/hr.