Panasonic WJ-NV200 - - Manual (Page 92)

92
• General
Power source: 120 V AC 60 Hz (WJ-NV200K)
220 V – 240 V AC 50 Hz/60 Hz (WJ-NV200K/G)
Power consumption: 45 W
Ambient operating temperature: Main body: +5 °C to +45 °C {41 °F to 113 °F}
Mouse (provided): +5 °C to +40 °C {41 °F to 104 °F}
Ambient operating humidity: 5 % - 90 % (non condensing)
Maximum operating altitude: 2000 m {6562 feet} or less
Dimensions
(excluding rubber feet and projections): 420 mm (W) x 88 mm (H) x 300 mm (D) {16-17/32" (W) 3-15/32" (H) 11-13/16" (D)}
Weight:
Approx. 4.8 k g {10.60 lbs.}
When a single hard disk drive is installed: Approx. 5.6 k g {12.36 lbs.}
When two hard disk drives are installed: Approx. 6.4 k g {14.13 lbs.}
Finish: Front view Solid metallic coating
Top cover: Solid metallic coating
Rear view Galvanized steel
•
HDD (Locally procured – Contact your dealer.)
Hard disk drive 3.5" Serial ATA hard disk drive (Up to 2 hard disk drives can be installed.)
• Input/Output
Image: Spot output connector (BNC) 1 V[p-p]/75 Ω, x1 (BNC)
Monitor (HDMI) connector: HDMI, x1
Audio: Audio output connector: −10 dBV, 10 kΩ, unbalanced x1 (RCA pin jack)
Others: Mouse connection port: x1
Alarm/control terminal: Alarm input 1-9 ch* 1 , Network error output* 2 , Alarm reset
input* 1 , Face matching output* 2 , HDD error output* 2 , Camera
error output* 2 , Recorder error output* 2 , Recording error out-
put* 2 , Time adjustment signal input* 1 , Alarm output* 2 , +5 V
output* 3 (D-sub 25-pin)
Network port: 10BASE-T/100BASE-TX/1000BASE-T (RJ-45) x1
SDHC/SD memory card slot: SDHC/SD memory cards applicable (miniSD cards
and microSD cards not applicable)
*1 Non-voltage make contact input, 50 kΩ +5 V DC pull-up
*2 Open collector output, 24 V DC, –100 mA max.
*3 200 mA max.
• Option
Recommended SDHC/SD memory card
Manufactured by Panasonic
SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB
SD memory card: 256 GB, 512 GB, 1 GB, 2 GB
Specifications