Adesso NuScan 2100 Series - Manual (Page 7)

SYSTEM SETTING
6
Start of Configuration
RESET
y The reading of the "RESET”
label turns all the
parameters back to default
values.
y When you intend to turn
your scanner back to
default parameter, please
scans the "Start of
configuration" label first,
then scan "RESET" label
ABORT
RS-232C
PC/AT
USB
WAND EMULATION
SHOW VERSION
• The reading of the "ABORT"
label discards all the
parameters read prior to the
"End of configuration".
• The scanner remains in the
last interface mode when
the scanner is reset. The
label below should be
scanned if the scanner is
configured the first time.
z The reading of the “SHOW
VERSION” label will be
show firmware version.
End of Configuration
7