A.2.6 pnp/pci configuration – Acnodes FPC 8084 User Manual
Page 58

FPC 8084 User s Manual
A.2.6
PNP/PCI Configuration
This section describes the PCI bus system configuration. PCI or
Personal Computer Interconnect is a system which allows I/O devices
to
operate at
speeds nearing
the
speed
of
the
CPU
when
communicating with its own special components. This section covers
some very technical items, and it is strongly recommended that only
experienced users should make changes to the default settings.
Phoe nix – Award BIOS CMOS Setup Utility
PnP/PCI Configur ations
PNP OS Installed
No
Item Help
Reset Configuration Data
Disabled
Resources Controlled By
Manual
Menu Level f
X IRQ Resources
Press Enter
Select Yes if you are
X DMA Resources
Press Enter
using a Plug and play
capable operating
PCI/VGA Palette Snoop
Disabled
system select No if
Assign IRQ For VGA
Enabled
you need the BIOS to
Assign IRQ For USB
Enabled
configure non-boot
devices
ЗИЖЕ : Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit F 1:
General Help
F5: Previous Values F 6: F ail-Safe Defaults F7 : Optimized Defaults
PNP OS Installed
This item is to determine install PnP OS or not. The options available are
Yes and No.
Reset Configuration Data
Normally, this field is
Disabled . Select
Enabled to reset Extended
System Configuration Data (ESCD). W hen exiting Setup or installed a
new add-on, the system reconfiguration has caused such a serious
conflict that the operating system cannot boot. The options available are
Enabled and Disabled.
56