A.2.1 standard cmos setup – Acnodes FPC 8084 User Manual
Page 38

FPC 8084 User s Manual
A.2.1
Standard CMOS Setup
“Standard CMOS Setup” is used to record some basic hardware
configurations in the computer system and set the system clock and
error handling. If the motherboard is already installed in a working
system, there is no need to enter this option. However, the Standard
CMOS option has to be setup in any of the following situations: the
system hardware configurations are changed, the onboard battery
fails, and the configuration stored in the CMOS memory is lost or
damaged.
Phoe nix – Award BIOS CMOS Setup Utility
Stand ard CMOS Feat ures
Date (mm:dd:yy)
Wed,
Aug
7 2002
Item Help
Time (hh:mm:ss)
13
:
9
:
11
f
IDE Primary Master
None
Menu Level f
f
IDE Primary Slave
None
Change the
f
IDE Secondary Master
None
Day, month,
f
IDE Secondary Slave
None
Year and
Century
Drive A
1.44M, 3.5 in.
LCD
Type
T9 800x600 TFT
Screen Expansion
Enable
TV Type
NTSCDisplay
Type During Post
VGA Default
Display Type After Post
VGA Default
Halt on
All, But keyboard
Base Memory
640K
Extended Memory
65535K
ЗИЖЕ : Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit F 1:
General Help
F5: Previous Values F 6: F ail-Safe Defaults F7 : Optimized Defaults
At the bottom of the menu are the control keys for the use of this
menu. The
relevant information for help. The memory display at the lower
right-hand side of the menu is read-only. It will adjust automatically
36