Acnodes FPC 8084 - Manual (Page 29)

FPC 8084 User s Manual
5. Calibration:
To adjust the display with touch panel, click “Calibration” and follow the
calibrate point to do calibration; there are five points on screen for
calibration.
6. Press OK.
3.2.3 Driver Installation- DOS
3.2.3.1 Using “INSTALL.EXE” utility to install
PenMount software driver.
1. Insert Driver CD and select the “Driver\Touch screen\DOS\
Install.exe
2. Press ENTER key to install the drivers to drive C or use keyboard
to key-in the hard disc drive that you plan to install the driver.
3. The driver will ask “Do you want to modify your Autoexec.bat to
initialize PenMount? (Y/N)” Suggest you choose “YES” for
generating the initialization instructions in AUTOEXEC.BAT files.
Then follow up the instructions to complete the installation.
3.2.3.2 Identify the communication port and IRQ
27