Panasonic DMWFL500E - Manual (Page 14)

14
VQT0Z62
Push the [MODE] button, and select the flash
mode. (P13)
≥ The flash working range is shown on the
display panel in line with the settings of the
digital camera.
A: Flash working range
1 Check that the distance to the
subject is within the flash
working range.
≥ If the subject is outside the range, adjust
the aperture of the lens or change the
distance to the subject.
≥ The flash working range changes
depending on the type and settings (ISO
sensitivity, aperture and focal length) of
the digital camera used.
2 Push the shutter button all the
way down, and take the picture.
3 Check that the [AUTO CHECK]
lamp is flashing.
≥ If the [AUTO CHECK] lamp continues to
flash for about 5 seconds, it means that
the unit has fired successfully.
[TTL AUTO]
A
AUTO
CHECK
VQT0Z62.book 14 ページ ２００６年６月２２日 木曜日 午前１１時４６分