Panasonic TYTP42P8S - Manual (Page 17)

17
Installation of the USB Driver
COM port number is confirmed with “Device Manager”
“Driver Files Search Results” is indicated.
6 Click on this button.
Driver software is set up, and “Completing the Found New
Hardware Wizard” is indicated.
7 Click Finish to close this wizard.
8 It is recognized as new hardware once again, and the
screen on the left is displayed.
1 Click on [Start]
[Settings] [Control Panel]
Double-click on “the system” icon of the control panel,
and open the properties of the system.
2 The properties of the system opens, click on the
“Hardware” tab. Then click on the “Device Manager”
button.
3 Double-click “Ports [COM&LPT]”.
Confirm that “USB-Serial for Touch Panel V2 (COMx)”
is found in “Ports [COM&LPT]”.
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
The setup of the USB driver is finished.