Alpine PKG-RSE2 - Manual (Page 22)

20
-EN
Setting the Dimmer
4
Press or to select AUTO/LOW/HIGH. (Default:
AUTO)
AUTO adjusts the LCD backlight brightness automatically by
sensing the ambient light from the luminance sensor.
Setting the Dimmer Low Level
4
Press or to select low level of Dimmer
between 0 (min.) to 15 (max.). 15 (max.) is the same
brightness level with HIGH on Dimmer menu.
Setting the Beep
4
Press or to turn on/off beep sound. (Default:
ON)
Setting the DVD Auto Play
4
Press or to select NORMAL/AUTO/SKIP.
NORMAL: Stay on the menu until the user input.
AUTO: Play movie after 6 seconds on the menu.
SKIP: Play movie Immediately. It will skip
previews and the menu.
• This setting is only available before inserting a disc, or
when in stop mode.
• To activate SKIP mode, a disc must be ejected and reloaded
after setting. (Note: SKIP mode can not be activated, when
a disc is inserted or reloaded while Alpine logo is shown on
the screen monitor.)
• This function is not available on some discs.
Resetting to the Factory Default
4
Press ENTER Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
DVD Setup values will not be affected.
Se i g S e C l
IR transmitter, FM transmitter, FM frequency, dimmer and beep can
be adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECT ENT