Alpine PKG-RSE2 - Manual (Page 20)

18
-EN
Resetting the Picture Adjustment
2
Press ▲ or ▼ and select RESET.
3
Press or to reset the picture adjustments.
• If you do not press or within 6 seconds, OSD disappears
and the previous adjustments will not be reset.
Se i g A di & Sc ee
Each source has different menu. Depending on the selection of source,
setting menu changes.
• Each source can be adjustable individually.
• Adjusting should be made within 6 seconds, otherwise OSD
(On Screen Display) will be automatically turned off.
1
Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
SELECT
Front Control Keys
Remote Control
2
Press SELECT/SETUP to switch to
AUDIO&SCREEN setting menu from PICTURE
setting menu. To change each item, press
▲ or ▼ .
Adjusting the Tint
2
Press ▲ or ▼ and select TINT.
3
Press or to adjust the tint. Tint tone can be
adjusted from G15 (G MAX) to R15 (R MAX).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Contrast
2
Press ▲ or ▼ and select CONTRAST.
3
Press or to adjust the contrast. Contrast can
be adjusted from –15 (LOW) to +15 (HIGH).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Sharpness
2
Press ▲ or ▼ and select SHARPNESS.
3
Press or to adjust the screen quality. Screen
quality can be adjusted from -15 (SOFT) to +15
(HARD).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
SETUP